1.8" TFT Electronic Display
tft_display2tft_display3tft_display4tft_display5tft_display61.8" TFT Electronic Display

1.8 Inch 128×160 SPI Serial TFT LCD Display Module

$8.99

Description:

TFT Power: Screen Power is 2.8-3.3V
(Modules with PCB’s have inherited 3V regulator IC, you can enter 5V)
Backlight power supply (LED pin): 3.2V maximum backlight power
(At 3.3V supply can be connected in series for 10 ohm current limiting resistor in series with 100 ohms or 5V
Resistance).
Data port level: theoretically can not let the data port level exceeds 3.3V, if you must use IO connection with 5V microcontroller data bus, as TFT internal voltage clamp, it can be used, but is not always standard.

SKU: 969263 Category: Tags: ,

Product Description

1.8 Inch 128×160 SPI Serial TFT LCD Display Module

Program default IO connections:

sbit LCD_CS = P0 ^ 0; Chip Select
sbit LCD_RS = P0 ^ 2; data / command switch
sbit LCD_SDA = P1 ^ 5; Data
sbit LCD_SCK = P1 ^ 7; Clock
sbit LCD_REST = P0 ^ 1; Reset

Description:

TFT Power: Screen Power is 2.8-3.3V
(Modules with PCB’s have inherited 3V regulator IC, you can enter 5V)
Backlight power supply (LED pin): 3.2V maximum backlight power
(At 3.3V supply can be connected in series for 10 ohm current limiting resistor in series with 100 ohms or 5V
Resistance).
Data port level: theoretically can not let the data port level exceeds 3.3V, if you must use IO connection with 5V microcontroller data bus, as TFT internal voltage clamp, it can be used, but is not always standard.

 

Additional Information

Weight .0035 lbs

Reviews

There are no reviews yet.

Be the first to review “1.8 Inch 128×160 SPI Serial TFT LCD Display Module”

Your email address will not be published. Required fields are marked *